This production line is suitable for continuous longitudinal shearing strips with a width of 800- 1600mm and a thickness of 0.5-4mm for hot-rolled ordinary carbon structural steel, low-alloy structural steel and other materials. Referred to as 1600 × 0.5 ~ 4mm slitting unit.
1. Material specification
Material Low carbon HRC (Q235, σs=250Mpa,σb=500Mpa )
Coil Thickness 0.5～4.0 mm
Coil Width 300-1600mm
Coil Weight ≤20 t
Inner diameter Φ508/610
Outer diameter ≤Φ1800mm
2． Finished product specification
Coil weight 20t
Inner diameter Φ508mm
Outer diameter Φ1800mm
Width precision ±0.10 mm(thickness 0.5--3.0)
±0.20 mm(thickness 3.1--4.0)
Burr accuracy ≤5% Plate thickness,(0.08-0.20mm)
Coils open speed 90-120m/min
3.Equipment datas
(1) Power : Voltage 380V Frequency 50HZ Installed power Approx.330kw
(2) Air power Pressure 0.4-0.6Mpa Air demand 0.2m3/min(State of compression)
3.Formal Equipment composition
| No. | Name |
| 1 | Coil preparation stage |
| 2 | Coil car |
| 3 | Uncoiler |
| | Pressure leading device |
| 4 | Clamp&Straightener |
| 5 | Shearing |
| 6 | 1# Accumulator |
| 7 | Guiding device |
| 8 | Pinch roll |
| 9 | Slitter machine |
| 10 | Edge rewinder |
| 11 | Wear tape table and material tail pressing plate |
| 12 | 2# Accumulator |
| 13 | Seperation device |
| 14 | Tension plate |
| 15 | 3-roll tension burr extruding machine |
| 16 | Steering roller and feed head guide plate |
| 17 | Recoiler+Coiling support |
| 18 | Unloading car |
| 19 | Spacer and other process parts |
| 20 | Hydraulic penumatic system |
| 21 | Electric system |
| 22 | Oil pipe,Air pipe,cables |
| 23 | Anchor bolts and accessories |
Make appropriate changes to the above information according to customer needs
Quality Commitment and Service
1. Equipment warranty for one year, long-term maintenance.
2. Provide general assembly drawing, foundation drawing, piping layout drawing, electrical schematic drawing, wearing parts drawing and other necessary drawings of the equipment.
3. The company has a full-time technical service team, mainly composed of engineers and technicians. After receiving the user's notification, we can give an immediate reply, and send someone to the user's site for after-sales service at any time.
Take photo with customers
